Fix suggestion for little problem about Define Store Rcycler

[EmreTLN]

Dear @Death
 

Thank you for adding storage adapters to the recyclers in scourge.  However, there's an issue: the recycler is transferring items out very slowly. For instance, when I place 6 stacks of 100x smoke bombs in it, the output only trickles metal and gunpowder. The recycler stops automatically when its output fills up, which is frustrating.

I've tried adjusting the conveyor settings to transfer items when there are 20 smoke bombs left in the recycler and to limit the output to a maximum of 40 at a time. This helps prevent the output from filling up too quickly, but sometimes the conveyors can't keep up with the recycler's pace. This results in the recycler transferring items even when there are no smoke bombs left, causing it to stop automatically once it runs out of items to process.

I see two potential solutions to this issue:

Increase the transfer speed or quantity of items on the conveyors.

Add an automatic activation feature to the recycler.

However, the second solution might create a new problem: if the output is full, the recycler will continue operating and start discarding items as it melts them down, potentially causing players to lose items when they are offline or not monitoring the recycler.

Do you think we can find a solution for this?

Edited June 27 by EmreTLN

[Sweet Tooth]

The best thing to do with the recycler is to experiment and use more conveyors on the output till you have it to where it will pull out the output as fast as it is fulling up 

[EmreTLN]

@Death Can you check this pls  https://codefling.com/plugins/conveyor-stacks