Oil Refineries require wood after every restart US-Scourge

I believe you have to use a button to do this, not a switch. Give that a shot, hopefully it helps o7

I use a timer switch set to 1 second. I just like the lever action better  Originally I had the timer switch tied into a solar panel because I was going to try to make it activate once per day/night cycle. But the solar panels are wonky and like to push intermittently. Anyways. There's nothing wrong with my electrical. The igniters all work. I just have to check each refinery manually before they will work with no wood.

This is probably not an issue for people who light their refineries and/or load them manually

heres a video showing the issue. This is immediately after a server restart. Once I check each furnace, they will all ignite with the switch and no wood, no problem

Essentially, what's happening is the refineries are forgetting I'm VIP after every server restart.

Once I interact with them directly, they remember.

Make sense?

Here's a video of how I get them to start working again. Once I open and close each refinery they work with my igniter system as intended and they will continue to work flawlessly until the next server restart.

This also shows my electrical works just fine. It doesn't matter if it's a button or a switch, as long as each igniter gets 2 power. Putting them on a regular switch and leaving it on just causes the igniters to go off continuously and destroy themselves. That's why I have the timer switch. A button would probably work too. This is just more visually appealing to me. It's also easier to tell when you've flipped the switch, you can see it flip and it makes a sound.

@Cartmon I have the 12 set up because I have a vending machine that sells 3 low grade for 1 crude. I need the extra refinery capacity for when people use that.